3
SAFETY INSTRUCTIONS
Thank you for choosing this product, for optimum and safe operation
carefully observe the instructions and recommendations within this manual.
General Safety Advice
Commissioning, maintenance and servicing should only
be carried out by professionally qualified personnel in
accordance with BS EN 16005 and approved by Horton
Automatics Ltd.
Do not tamper or adjust operation of the drive or
connected devices
The Horton 4100 Plus drive is an electro mechanical system for automation
of pedestrian entrances in accordance with BS EN 16005. It has been
designed and built exclusively for this application. Use for any other purpose
could affect the integrity of the product and result in hazardous operation.
Horton Automatics Ltd. does not accept any liability resulting from misuse or
use other than its intended use.
User Safety Advice
Do not run or idle in entrance area
Supervise minors and assist elderly or infirm using door
Observe all safety instructions, signage and warnings.
Be aware of the action of others and advise where
inappropriate behaviour presents a risk.
To Next Page
Loading...