Webcam module
Description Spare part number
Webcam module, HD, for use in HP 205 G1 and HP 18 models 752344-001
Webcam module, VGA, for use in HP 205 G2 models 806245-001
On products that ship with a webcam module, the module is located at the top of the computer beneath the
top panel. It is secured with two silver Phillips screws and has one connector.
The webcam module is optional.
To remove the webcam module:
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 19).
2. Remove the rear cover (see Rear cover on page 20).
3. Press the tabs on each side of the webcam module and lift it up away from the tabs.
22 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis