EasyManuals Logo

HP 205 G1 User Manual

HP 205 G1
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Computer Setup—Advanced
NOTE: Support for specic Computer Setup options may vary depending on the hardware conguration.
Table 6-6 Computer Setup—Advanced (for advanced users)
Option Heading
Power-On Options Allows you to set:
POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days).
QuickBoot (default) = Do not clear memory or perform a memory test.
FullBoot = Memory test (count) on cold boot. Clears memory on all boots.
Clear Memory = No memory count on cold boot. Clears memory on all boots.
FullBoot Every x Days = Memory count on 1st cold boot on or after the xth day. No more
memory counts until 1st cold boot on or after x days. Clears memory on all boots.
POST messages (enable/disable). Enabling this feature will cause the system to display POST error
messages, which are error messages displayed during the Power On Self Test if the BIOS encounters
some kind of problem while starting the PC. A POST error message will only display on screen if the
computer is capable of booting this far. If the POST detects an error before this point, a beep code is
generated instead. Default is disabled.
Press the ESC key for Startup Menu (Enable/Disable). This feature controls the display of the text
“Press the ESC key for Startup Menu” during POST. This text does not display on Windows 8.1
systems with Fast Boot support. Other text also will not display (for example, Ownership Tag).
Default is enabled.
Option ROM Prompt (enable/disable). Enabling this feature will cause the system to display a
message before loading option ROMs. Default is enabled.
After Power Loss (o/on/previous state). Default is Power o. Setting this option to:
Power o—causes the computer to remain powered o when power is restored.
Power on—causes the computer to power on automatically as soon as power is restored.
Previous state—causes the computer to power on automatically as soon as power is restored,
if it was on when power was lost.
NOTE: If you turn o power to the computer using the switch on a power strip, you will not be able to
use the suspend/sleep feature or the Remote Management features.
POST Delay (in seconds). Enabling this feature will add a user-specied delay to the POST process.
This delay is sometimes needed for hard disks on some PCI cards that spin up very slowly, so slowly
that they are not ready to boot by the time POST is nished. The POST delay also gives you more
time to select F10 to enter Computer (F10) Setup. Default is None.
Remote Wakeup Boot Source (remote server/local hard drive). Default is Local hard drive.
Factory Recovery Boot Support (Enable/Disable). Provides the ability for the BIOS to redirect the
boot to the recovery partition on the user hard drive, if present. Some versions of the recovery
software honor the F11 key press even when this feature is disabled by the BIOS. Default is disabled.
Bypass F1 Prompt on Conguration Changes (Enable/Disable). Allows you to set the computer not to
conrm when changes were made. Default is disabled.
BIOS Power-On Allows you to set the computer to turn on automatically at a time you specify.
Onboard Devices Allows you to set resources for or disable Legacy devices.
Select the Legacy device's IRQ, DMA, and I/O Range. The settings may not take eect for all operating
systems. To hide a device from the operating system, see Security > Device Security.
Bus Options Allows you to enable or disable:
PCI SERR# Generation. Default is enabled.
Computer Setup (F10) Utilities 59

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 205 G1 and is the answer not in the manual?

HP 205 G1 Specifications

General IconGeneral
Full HDNo
LED backlight-
Display diagonal18.5 \
Display resolution1366 x 768 pixels
Native aspect ratio16:9
Processor cores2
Processor modelE1-2500
Processor familyAMD E
Processor frequency1.4 GHz
Processor manufacturerAMD
Product typeAll-in-One PC
Internal memory4 GB
Memory slots typeSO-DIMM
Memory clock speed1600 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory8 GB
Memory layout (slots x size)1 x 4 GB
HDD speed7200 RPM
HDD interfaceSATA
Storage mediaHDD
Optical drive typeDVD Super Multi
Card reader integratedYes
Total storage capacity500 GB
Storage drive interfaceSerial ATA
Discrete graphics card modelNot available
On-board graphics card modelAMD Radeon HD 8240
On-board graphics card familyAMD Radeon HD 8000
Wi-Fi standardsNot supported
Ethernet LAN data rates10, 100 Mbit/s
Headphone outputs1
USB 2.0 ports quantity4
Thunderbolt ports quantity0
Operating system installedUbuntu Linux
Product colorBlack, Silver
Country of originChina
Total megapixels- MP
AC adapter power65 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)15 - 80 %
Sustainability certificatesENERGY STAR
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)72 mm
Width (with stand)470 mm
Height (with stand)329 mm
Weight (with stand)5500 g

Related product manuals