To Next Page

To Previous Page

Do not know how to remove a media card correctly.

Cause Solution

The computer’s software is used to safely eject the card. In Windows 7, click Start, select Computer, right-click on the

corresponding drive icon, and then select Eject. Pull the card out

of the slot.

In Windows 8.1, on the Start screen, type e, and then click File

Explorer from the list of applications. Expand Computer, right-

click on the corresponding drive icon, and then select Eject. Pull

the card out of the slot.

In Windows 10, type file in the taskbar search box, and then

select File Explorer from the list of applications. In the left

column, expand This PC, right-click on the corresponding drive

icon, and then select Eject. Pull the card out of the slot.

NOTE: Never remove the card when the green LED is ashing

After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by the

computer.

Cause Solution

The operating system needs time to recognize the device if the

reader was just installed into the computer and you are turning

the PC on for the rst time.

Wait a few seconds so that the operating system can recognize

the reader and the available ports, and then recognize the media

inserted in the reader.

After inserting a media card in the reader, the computer attempts to boot from the media card.

Cause Solution

The inserted media card has boot capability. 1. If you do not want to boot from the media card, remove it

during boot or do not select the option to boot from the

inserted media card during the boot process.

2. During POST (Power On Self-Test), press F9 to modify the

boot menu.

3. Change the boot sequence in F10 Computer Setup.

Solving display problems

If you encounter display problems, see the documentation that came with the monitor and to the common

causes and solutions listed in the following table.

Blank screen (no video).

Cause Solution

Monitor is not turned on and the monitor light is not on. Turn on the monitor and check that the monitor light is on.

Bad monitor. Try a dierent monitor.

The cable connections are not correct. Check the cable connection from the monitor to the computer and

to the electrical outlet.

72 Chapter 7 Troubleshooting without diagnostics

Questions and Answers:

Need help?

Do you have a question about the HP 205 G1 and is the answer not in the manual?

HP 205 G1 Specifications

General

Full HD	No
LED backlight	-
Display diagonal	18.5 \
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Processor cores	2
Processor model	E1-2500
Processor family	AMD E
Processor frequency	1.4 GHz
Processor manufacturer	AMD
Product type	All-in-One PC
Internal memory	4 GB
Memory slots type	SO-DIMM
Memory clock speed	1600 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	1 x 4 GB
HDD speed	7200 RPM
HDD interface	SATA
Storage media	HDD
Optical drive type	DVD Super Multi
Card reader integrated	Yes
Total storage capacity	500 GB
Storage drive interface	Serial ATA
Discrete graphics card model	Not available
On-board graphics card model	AMD Radeon HD 8240
On-board graphics card family	AMD Radeon HD 8000
Wi-Fi standards	Not supported
Ethernet LAN data rates	10, 100 Mbit/s
Headphone outputs	1
USB 2.0 ports quantity	4
Thunderbolt ports quantity	0
Operating system installed	Ubuntu Linux
Product color	Black, Silver
Country of origin	China
Total megapixels	- MP
AC adapter power	65 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	15 - 80 %
Sustainability certificates	ENERGY STAR
Cables included	AC