The device takes the following actions for a critical battery level:
●
If Hibernation is enabled and the device is on or in Suspend, the device initiates Hibernation.
●
If Hibernation is disabled and the device is on or in Suspend, the device remains briefly in Suspend,
and then shuts down and loses any unsaved information.
Resolving a low battery level
CAUTION: To reduce the risk of losing information when the device reaches a critical battery level
and has initiated Hibernation, do not restore power until the power lights turn off.
Resolving a low battery level when external power is available
▲
Connect one of the following devices:
●
AC adapter
●
Optional expansion product or docking device
●
Optional power adapter
Resolving a low battery level when a charged battery is available
1. Turn off the device or initiate Hibernation.
2. Remove the discharged battery, and then insert a charged battery.
3. Turn on the device.
Resolving a low battery level when no power source is available
▲
Initiate Hibernation.
– or –
Save your work and shut down the device.
Resolving a low battery level when the device cannot exit Hibernation
When the device lacks sufficient power to exit Hibernation, follow these steps:
1. Insert a charged battery or plug the device into external power.
2. Exit Hibernation by briefly sliding the power switch.
Calibrating a battery
Calibrate a battery under the following conditions:
●
When battery charge displays seem inaccurate
●
When you observe a significant change in battery run time
Even if a battery is heavily used, it should not need to be calibrated more than once a month. It is also
not necessary to calibrate a new battery.
Using battery power 39
To Next Page
Loading...
Need help?
General
