HP 3000 Series - Special Considerations

For HP Internal Use Only
Special Considerations
The following is a special list of items which should be considered when configuring a system
cabinet.
• Unless a cabinet is ordered with a 120V option, all cabinets will contain a 220V PDU
(including the USA).
• Peripheral connection to the cabinet PDU requires a special power cord, P /N 8120-1860.
The power cord ships with all supported components EXCEPT FOR the 1/2inch tape drive
and any DTC's acquired from previous system installations.
• A special power cord (P /N 8120-1860) MUST be ordered for all racked equipment not listed
in the tables.
Configuration 4-53