HP 37717C Calibration Manual

3-162
Performance Tests
Jitter Receiver STM-1 Optical Interface (Options A1N, [A1R], A3V
[A3W])
Jitter Receiver STM-1 Optical Interface (Options A1N,
[A1R], A3V [A3W])
NOTE This test requires other modules to be fitted - see Appendix B.
Specification
Description
The jitter receiver optical sensitivity is verified by attenuating the transmitter output
and checking for no errors in back to back mode.
Equipment Required
Wavelength 1200 nm to 1600 nm
Maximum Input Power -8 dBm (for BER of 1.0E
-10
)
Line Coding NRZ
Dynamic Range 20 dB minimum
Sensitivity -28 dBm Minimum (wavelength=1300nm,
Modulation=100%, Data=2
23
-1, BER=1.0E
-10
)
Power Meter : HP 8153A
Power Meter Sensor Module : HP 81536A
FC/PC Connector Interface : HP 81000FI (Qty. 4)
Optical Attenuator : HP 8157A
Optical Cables (Qty. 2) : HP 11871A

HP 37717C Specifications

General

Brand	HP
Model	37717C
Category	Measuring Instruments
Language	English