Local port operation 48
When you attempt to preempt another user or Admin, a Message appears on your screen, and a
Preempt Warning appears on the screen of the user or Admin.
These messages appear for the time assigned in the Timeout Seconds field set through either the
local OSD or the HP IP Console Viewer. If the user you are preempting does not respond within the
selected time, the user is disconnected and the preemption is granted.
Managing server tasks using the OSD
You can manage the console switch system from the Commands dialog box with the OSD.
Managing the console switch system includes engaging Scan mode, managing user connections, running
diagnostics, and updating your firmware.
To access the Commands dialog box, click Main>Commands. The Commands dialog box appears.
To Next Page
Loading...
Need help?
General