HP 409054-003 - Enabling the USB 2.0 Function

Using Virtual Media 65
3.
To view the selected interface adapter, click Version. The IA Version dialog box appears. When the
USB 2.0 interface adapter with Virtual Media or the PS2 interface adapter with Virtual Media are in
USB 2.0 mode, the Disable button appears.
4. Click Disable to force the interface adapter into USB 1.1 mode. The interface adapter reboots and
the IA Select dialog box appears.
Enabling the USB 2.0 function
If your target server BIOS or operating system supports USB 2.0 devices and you disabled the USB 2.0
function of the USB 2.0 interface adapter with Virtual Media from the console switch local OSD, which
enables the interface adapter to operate in USB 1.1 mode, you can enable USB 2.0 mode for that server.
To enable the USB 2.0 function: