Upgrading the firmware 83
adapter firmware through the autoupdate feature" on page 85). The servers attached to the interface
adapters must be powered on while upgrading the firmware.
Loading interface adapter firmware individually
NOTE: This method of loading the interface adapter firmware will always overwrite the current
version of firmware in the interface adapter. HP recommends upgrading your interface
adapters simultaneously ("Upgrading the interface adapter firmware simultaneously" on page
84), which only upgrades interface adapters needing a new version of firmware.
1. From the Main dialog box ("Accessing the Main dialog box" on page 28), click Commands>Display
Versions. The Version dialog box appears.
2. Click IA. The IA Select dialog box appears.
To Next Page
Loading...
