Upgrading the firmware 82
6.
Select Option 2—Firmware Management. The Firmware Management Menu appears.
7. Select one of the following options:
o Option 1—Flash Download (TFTP).
o Option 2— Flash Download (FTP).
8. Enter the IP address of the TFTP or FTP server that has the upgradeable file, and then enter the exact
path of the upgradeable file (for example, C:\tftp\h3_0_0_english.fl). If you are upgrading using
the FTP option, you must enter a username and password to complete the upgrade.
9. Enter Y at the prompt to download the upgradeable file from the given IP address. The console
switch begins to upgrade.
CAUTION: Do not cycle power to the console switch during this process. A loss of power
might render the console switch inoperable and require that the unit be returned to the factory
for repair. Be patient; the update can take as long as 10 minutes.
When the upgrade process is complete, the console switch reboots.
Upgrading interface adapter firmware
The interface adapter firmware can be loaded individually ("Loading interface adapter firmware
individually" on page 83), upgraded simultaneously ("Upgrading the interface adapter firmware
simultaneously" on page 84), or upgraded by enabling the autoupdate feature ("Upgrading the interface
To Next Page
Loading...
