HP 409054-003 - Network and Firmware Management; Security and Password Management

Console switch serial management 70
To access the Main Menu:
1. Establish a terminal session, and then press Enter. The Main Menu appears.
Network Configuration
The Network Configuration option provides different settings to configure your network. For more
information, see "Configuring the console switch NIC."
Firmware Management
The Firmware Management option updates the firmware using a TFTP or FTP server.
Enable Debug Messages
The Enable Debug Messages option enables you to debug the system. Select yes to debug the system.
Set/Change Password
The Set/Change Password option enables you to set or change your serial interface password.