EasyManuals Logo

HP 5830 series User Manual

HP 5830 series
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
18
Ste
p
Command
Remarks
2. Set the authentication mode
for user privilege level
switching.
super authentication-mode { local
| scheme } *
Optional.
By default, local-only
authentication is used.
3. Configure the password for a
user privilege level.
super password [ level user-level ]
[ hash ] { cipher | simple }
password
Required for local authentication.
By default, a privilege level has no
password.
If you do not specify a user
privilege level when configuring
this command, you configure a
password for switching to user
privilege level 3.
If local-only authentication is used, an AUX user interface user (a user logged in through the console port)
can switch to a higher privilege level even if the privilege level has not been assigned a password.
Switching to a higher user privilege level
Before you switch to a higher user privilege level, obtain the required authentication data as described
in Table 9.
T
he privilege level switching fails after three consecutive unsuccessful password attempts.
To switch the user privilege level, perform the following task in user view:
Task Command
Remarks
Switch the user privilege level. super [ level ]
When logging in to the device, a
user has a user privilege level,
which depends on user interface or
authentication user level.
Table 9 Information required for user privilege level switching
User interface
authentication
mode
User privilege level
switching
authentication
mode
Information required for
the first authentication
mode
Information required for the
second authentication mode
none/password
local
Password configured on the
device with the super
password command for the
privilege level.
N/A
local scheme
Password configured on the
device with the super
password command for the
privilege level.
Username and password
configured on the AAA server for
the privilege level.
scheme
Username and password for
the privilege level.
N/A
scheme local
Username and password for
the privilege level.
Local user privilege level
switching password.

Table of Contents

Other manuals for HP 5830 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 5830 series and is the answer not in the manual?

HP 5830 series Specifications

General IconGeneral
BrandHP
Model5830 series
CategorySwitch
LanguageEnglish

Related product manuals