HP 8712ES - Page 216

4-82 ES User’s Guide
Using Instrument Functions
Printing and Plotting Measurement Results
NOTE The following table provides some typical print times for various HP
printers. These values are typical only; they are not intended to
necessarily represent the print times you will experience. They are
provided for comparison only. In addition, the number of measurement
points, measurement trace complexity, number of traces, user graphics,
continuous sweep, and print size and format are among the many
parameters that can have an affect on your particular print time.
Table 4-2 Typical Print Times
a. Some DeskJets may not support 100 dpi resolution. If your plot is 2/3 size, use 150 dpi.
b. These times were measured with the HP DeskJet 1200C in "paper-fast" mode.
c. Do not use a color cartridge for mono print on single cartridge DeskJets.
d. Print width set to 181 mm to more closely match the size of PCL landscape print.
Printer
Resolution
(dpi)
a
Portrait Format (min:sec) Landscape Format (min:sec)
Desk-
Jet
400
Desk-
Jet
693C
Desk-
Jet
890C
Desk-
Jet
1200C
b
Desk-
Jet
1600C
Laser-
Jet 6L
Desk-
Jet
400
Desk-
Jet
693C
Desk-
Jet
890C
Desk-
Jet
1200C
b
Desk-
Jet
1600C
Laser-
Jet 6L
MONO
c
100
300
PCL5
0:43
0:50
N/A
0:37
0:36
N/A
0:19
0:24
N/A
0:18
0:30
0:13
0:26
1:05
0:27
0:27
0:38
0:22
0:50
1:00
N/A
0:48
0:47
N/A
0:24
0:29
N/A
0:21
0:39
0:16
d
0:52
1:25
0:52
0:27
0:44
0:22
d
COLOR
100
300
PCL5
1:53
4:30
N/A
0:56
2:30
N/A
0:50
1:22
N/A
0:29
1:34
0:16
0:55
3:20
0:35
N/A
N/A
N/A
2:24
6:01
N/A
2:05
3:18
N/A
1:12
1:49
N/A
0:46
2:15
0:31
d
1:30
4:50
1:10
N/A
N/A
N/A