HP A5120 EI Series User Manual

121
View
Interface view
Default level
2: System level
Parameters
acl acl-number: Specifies the ACL number, in the range 2000 to 3999. From 2000 to 2999 are numbers
for basic ACLs, and from 3000 to 3999 are numbers for advanced ACLs. Only directed broadcasts
permitted by the ACL can be forwarded.
Description
Use the ip forward-broadcast command to enable the interface to forward directed broadcasts to a
directly connected network.
Use the undo ip forward-broadcast command to disable the interface from forwarding directed
broadcasts to a directly connected network.
By default, an interface is disabled from forwarding directed broadcasts to a directly connected network.
Examples
# Enable VLAN-interface 2 to forward the directed broadcasts to a directly-connected network matching
ACL 2001.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ip forward-broadcast acl 2001
ip forward-broadcast (system view)
Syntax
ip forward-broadcast
undo ip forward-broadcast
View
System view
Default level
2: System level
Parameters
None
Description
Use the ip forward-broadcast command to enable the switch to receive directed broadcasts.
Use the undo ip forward-broadcast command to disable the switch from receiving directed broadcasts.
By default, the switch is disabled from receiving directed broadcasts..
Examples
# Enable the switch to receive directed broadcasts.
<Sysname> system-view
[Sysname] ip forward-broadcast

HP A5120 EI Series Specifications

General

Uplink Ports	4 x SFP
Stacking	No
Management	CLI, Web, SNMP
Routing Protocols	RIP, OSPF
Power Supply	AC
MAC Address Table Size	16K
Dimensions	440 x 430 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Model	HP A5120-24G EI Switch (JG234A)
VLANs	4094