20
bootfile-name
Syntax
bootfile-name bootfile-name
undo bootfile-name
View
DHCP address pool view
Default level
2: System level
Parameters
bootfile-name: Specifies the boot file name, a string of 1 to 63 characters.
Description
Use the bootfile-name command to specify a bootfile name in the DHCP address pool for the client.
Use the undo bootfile-name command to remove the specified bootfile name.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration will overwrite the previous
one.
Related commands: dhcp server ip-pool and display dhcp server tree.
Examples
# Specify the bootfile name aaa.cfg in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name aaa.cfg
dhcp enable
Syntax
dhcp enable
undo dhcp enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the dhcp enable command to enable DHCP.
Use the undo dhcp enable command to disable DHCP.
By default, DHCP is disabled.
To Next Page
Loading...
