182
DHCPv6 configuration commands
DHCPv6 common configuration commands
display ipv6 dhcp duid
Syntax
display ipv6 dhcp duid [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 dhcp duid command to display the DUID of the local device.
Examples
# Display the DUID of the device.
<Sysname> display ipv6 dhcp duid
The DUID of this device: 0003-0001-00e0-fc00-5552
DHCPv6 server configuration commands
display ipv6 dhcp pool
Syntax
display ipv6 dhcp pool [ pool-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
To Next Page
Loading...
