HP A5120 EI Series User Manual

78
Related commands: dhcp-snooping binding database filename.
Examples
# Configure the DHCP snooping entry file to be refreshed every 10 minutes.
<Sysname> system-view
[Sysname] dhcp-snoooping binding database update interval 10
dhcp-snooping binding database update now
Syntax
dhcp-snooping binding database update now
View
System view
Default level
2: System level
Parameters
None
Description
Use the dhcp-snooping binding database update now command to store DHCP snooping entries to the
file.
DHCP snooping entries will be stored to the file each time this command is used.
This command takes effect only when the DHCP snooping entry file is specified.
Related commands: dhcp-snooping binding database filename.
Examples
# Store DHCP snooping entries to the file.
<Sysname> system-view
[Sysname] dhcp-snooping binding database update now
dhcp-snooping check mac-address
Syntax
dhcp-snooping check mac-address
undo dhcp-snooping check mac-address
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
None

HP A5120 EI Series Specifications

General

Uplink Ports	4 x SFP
Stacking	No
Management	CLI, Web, SNMP
Routing Protocols	RIP, OSPF
Power Supply	AC
MAC Address Table Size	16K
Dimensions	440 x 430 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Model	HP A5120-24G EI Switch (JG234A)
VLANs	4094