HP A5120 EI Series

133
View
User view
Default level
2: System level
Parameters
None
Description
Use the reset udp-helper packet command to clear the forwarded statistics of UDP packets.
Related commands: display udp-helper server.
Examples
# Clear the statistics of the forwarded UDP packets.
<Sysname> reset udp-helper packet
udp-helper enable
Syntax
udp-helper enable
undo udp-helper enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the udp-helper enable command to enable UDP Helper. The switch enabled with UDP Helper
functions as a relay agent that converts UDP broadcast packets into unicast packets and forwards them to
a specified destination server.
Use the undo udp-helper enable command to disable UDP Helper.
By default, UDP Helper is disabled.
Examples
# Enable UDP Helper
<Sysname> system-view
[Sysname] udp-helper enable
udp-helper port
Syntax
udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
undo udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }