HP A5120 EI Series User Manual

36
Field
Description
network ip range
Range of assignable IP addresses in the extended address
pool
network mask
Mask of IP addresses assigned from the extended address
pool
dns-list
Syntax
dns-list ip-address&<1-8>
undo dns-list { ip-address | all }
View
DHCP address pool view
Default level
2: System level
Parameters
ip-address&<1-8>: Specifies the DNS server IP address. &<1-8> means you can specify up to eight DNS
server addresses separated by spaces.
all: Specifies all DNS server addresses to be removed.
Description
Use the dns-list command to specify DNS server addresses in a DHCP address pool.
Use the undo dns-list command to remove DNS server addresses from a DHCP address pool.
By default, no DNS server address is specified.
If you repeatedly use the dns-list command, the latest configuration will overwrite the previous one.
Related commands: dhcp server ip-pool and display dhcp server tree.
Examples
# Specify the DNS server address 10.1.1.254 for the DHCP client in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] dns-list 10.1.1.254
domain-name
Syntax
domain-name domain-name
undo domain-name
View
DHCP address pool view

HP A5120 EI Series Specifications

General

Uplink Ports	4 x SFP
Stacking	No
Management	CLI, Web, SNMP
Routing Protocols	RIP, OSPF
Power Supply	AC
MAC Address Table Size	16K
Dimensions	440 x 430 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% non-condensing
Model	HP A5120-24G EI Switch (JG234A)
VLANs	4094