146
2222::3 0 1280 --
Static
Table 36 Output description
ID of address zone, currently invalid
Path MTU (PMTU) value on the network path to an IPv6 address
Time for a PMTU to live. For a static PMTU, two consecutive hyphens (--)
are displayed.
Indicates that the PMTU is dynamically negotiated or statically
configured.
display ipv6 socket
Syntax
display ipv6 socket [ socktype socket-type ] [ task-id socket-id ] [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
socktype socket-type: Displays the socket information of this type. The socket type is in the range 1 to 3.
The value ―1‖ represents a TCP socket, ―2‖ a UDP socket, and ―3‖ a raw socket.
task-id: Displays the socket information of the task. The task ID is in the range 1 to 100.
socket-id: Displays the information of the socket. The socket ID is in the range 0 to 3072.
slot slot-number: Displays the socket information of a specified device in an IRF. If no IRF is formed, the
socket information of only the current device is displayed. The slot-number argument indicates the member
ID of the device.
If the switch does not support IRF, the slot-number argument must be 1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 socket command to display socket information.
To Next Page
Loading...
Need help?
General