39
gateway-list
Syntax
gateway-list ip-address&<1-8>
undo gateway-list { ip-address | all }
View
DHCP address pool view
Default level
2: System level
Parameters
ip-address&<1-8>: Specifies the gateway IP address. &<1-8> means you can specify up to eight gateway
addresses separated by spaces.
all: Specifies all gateway IP addresses to be removed.
Description
Use the gateway-list command to specify gateway address(es) in a DHCP address pool.
Use the undo gateway-list command to remove specified gateway address(es) specified for the DHCP
client from a DHCP address pool.
By default, no gateway address is specified.
If you use the gateway-list command repeatedly, the latest configuration will overwrite the previous one.
Related commands: dhcp server ip-pool and display dhcp server tree.
Examples
# Specify the gateway address 10.110.1.99 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] gateway-list 10.110.1.99
nbns-list
Syntax
nbns-list ip-address&<1-8>
undo nbns-list { ip-address | all }
View
DHCP address pool view
Default level
2: System level
Parameters
ip-address&<1-8>: Specifies the WINS server IP address. &<1-8> means you can specify up to eight
WINS server addresses separated by spaces.
all: Specifies all WINS server addresses to be removed.
To Next Page
Loading...
