204
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the DHCPv6 client statistics of a specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 dhcp client statistics command to display DHCPv6 client statistics.
With no parameters specified, DHCPv6 client statistics of all the interfaces is displayed.
Related commands: reset ipv6 dhcp client statistics.
Examples
# Display DHCPv6 client statistics of VLAN-interface 2.
<Sysname> display ipv6 dhcp client statistics interface vlan-interface 2
Interface : Vlan-interface2
Packets Received : 1
Reply : 1
Advertise : 0
Reconfigure : 0
Invalid : 0
Packets Sent : 5
Solicit : 0
Request : 0
Confirm : 0
Renew : 0
Rebind : 0
Information-request : 5
Release : 0
Decline : 0
Table 51 Output description
Interface that servers as the DHCPv6 client
Number of received packets
Number of received reply packets
Number of received advertise packets
Number of received reconfigure packets
Number of invalid packets
To Next Page
Loading...
Need help?
General
