HP A5120 EI Series - dhcp server ip-pool

16
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ip interface brief command to display brief IP configuration information for a specified
Layer 3 interface or all Layer 3 interfaces.
Without the interface type and interface number specified, the brief IP configuration information for all
Layer 3 interfaces is displayed.
With only the interface type specified, the brief IP configuration information for all Layer 3 interfaces of
the specified type is displayed.
With both the interface type and interface number specified, only the brief IP configuration information
for the specified interface is displayed.
Related commands: display ip interface.
Examples
# Display brief IP configuration information for VLAN interfaces.
<Sysname> display ip interface vlan-interface brief
*down: administratively down
(s): spoofing
Interface Physical Protocol IP Address Description
Vlan-interface1 up up 6.6.6.6 Vlan-inte...
Vlan-interface2 up up 7.7.7.7 Vlan-inte...
Table 3 Output description
Field
Description
*down: administratively
down
The interface is administratively shut down with the shutdown command.
(s) : spoofing
Spoofing attribute of the interface. It indicates that an interface whose link
layer protocol is displayed up may have no link present or the link is set up
only on demand.
Interface
Interface name
Physical
Physical state of the interface, which can be
 *down: Indicates that the interface is administratively down. The interface
is shut down with the shutdown command.
 down: Indicates that the interface is administratively up but its physical
state is down, which may be caused by a connection or link failure.
 up: Indicates that both the administrative and physical states of the
interface are up.
Protocol
Link layer protocol state of the interface, which can be
 down: Indicates that the protocol state of the interface is down.
 up: Indicates that the protocol state of the interface is up.
 up(s): Indicates that the protocol state of the interface is up (spoofing).
IP Address
IP address of the interface (If no IP address is configured, ―unassigned‖ is
displayed.)