USB Devices
Hardware and Software Guide 9–3
USB Legacy Support
You must enable USB legacy support to
■ Use a USB keyboard, mouse, or hub connected to a USB port
on the notebook during startup or in a non-Windows
application or utility.
■ Boot from an optional external MultiBay.
To enable USB legacy support:
1. Turn on or restart the notebook.
2. Press
f10 while the “F10 = ROM Based Setup” message
is displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏
For navigation instructions, press f1.
3. Select Advanced > Device Options > Enable USB legacy
support.
4. To save your preference and exit Computer Setup, select
File > Save Changes and Exit, and then follow the
instructions on the screen.
To Next Page
Loading...
