Power
Hardware and Software Guide 2–11
Initiating or Resuming from Standby
Task Procedure Result
Initiate standby. With the notebook on, perform
one of the following actions:
■ Press fn+f3.
■ Close the display.
■ Select Start > Turn Off
Computer> Standby.
(If the standby option is
not displayed, press the
shift key.)
■ The power/standby
lights blink.
■ The screen is
cleared.
Allow the system
to initiate
standby.
No action required.
■ If the notebook is running on
battery power, the system
initiates standby after 10
minutes of notebook
inactivity. (Default setting)
■ If the notebook is attached
to external power, the
system does not initiate
standby.
■ Power settings and timeouts
can be changed in the
Power Options window.
■ The power/standby
lights blink.
■ The screen is
cleared.
Resume from
user-initiated or
system-initiated
standby.
Press the power/standby
button.
■ The power/standby
lights are turned on.
■ Your work returns
to the screen.
To Next Page
Loading...
