HP Compaq NC4000 User Manual

B–2 Hardware and Software Guide
MultiBoot
Default Boot Sequence
By default, when more than one bootable device is in the system,
the notebook chooses the startup device by searching enabled
devices and locations in a predetermined sequence.
On every boot, the system looks for bootable drive A devices
first. If it fails to find a bootable drive A device, it searches for
bootable drive C devices. Drive A devices include optical drives
and diskette drives. Drive C devices include optical drives and
primary hard drives.
The primary hard drive can only boot as drive C. The NIC does
not have a drive letter assigned to it.
✎
An optical drive device (such as a CD) can boot either as
drive A or drive C, depending on the format of the disc. Most
bootable discs boot as drive A. If you have a disc that boots as
drive C, the system will boot the diskette drive before it boots
the disc.
By default, the notebook selects the startup device by searching
enabled devices and locations in a predetermined sequence.
You can change the sequence in which the notebook searches for
a startup device by enabling MultiBoot and entering a new startup
sequence, also called a boot order. Or, you can use MultiBoot
Express to set the notebook to prompt you for a startup location
each time the notebook is started or restarted.

HP Compaq NC4000 Specifications

General

Processor cache	1 MB
Processor model	-
Processor frequency	1.4 GHz
Processor cache type	L2
Processor front side bus	400 MHz
Processor core voltage (AC)	0.956 - 1.388 V
HDD speed	5400 RPM
HDD interface	Ultra-ATA/100
Optical drive type	No
Card reader integrated	Yes
Total storage capacity	40 GB
Compatible memory cards	SD
Number of HDDs installed	1
Pixel pitch	0.264 x 0.264 mm
Display diagonal	12.1 \
Display brightness	130 cd/m²
Display resolution	1024 x 768 pixels
Native aspect ratio	4:3
Display number of colors	16.78 million colors
Type	PC
Modem speed	56 Kbit/s
Power supply type	AC/DC
Power requirements	90 - 264V, 47/63Hz
Wireless technology	Wi-Fi
Graphics card family	AMD
Compatible operating systems	Windows XP
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Memory slots	2x SO-DIMM
Internal memory	0.25 GB
Internal memory type	DDR-SDRAM
Maximum internal memory	1 GB
Audio system	PS
Pointing device	Touchpad
Cabling technology	10/100/1000Base-T(X)
Networking features	Gigabit Ethernet
Operating system installed	Windows XP Professional
TV-out type	S-Video
Charging port type	DC-in jack
USB 2.0 ports quantity	2
Firewire (IEEE 1394) ports	0
Cable lock slot type	Kensington
AC adapter power	65 W
Number of battery cells	6
Operating shock	40 G
Operating altitude	0 - 3048 m
Non-operating shock	240 G
Operating vibration	0.5 G
Non-operating altitude	0 - 9144 m
Non-operating vibration	1 G
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Certification	UL, CSA, VDE/TUV
Product color	Black, Silver
Country of origin	China

Weight and Dimensions

Depth	233.7 mm
Width	279.4 mm
Height	27.9 mm
Weight	1590 g