Software Update and Recovery
Hardware and Software Guide 14–15
6. Press enter to continue. (A licensing agreement page is
displayed.)
7. Press
f8 to accept the agreement and continue. (The “Setup”
page is displayed.)
8. Press
esc to continue installing a new copy of the operating
system instead of repairing it.
9. Press
enter to set up the operating system.
10. Press
C to continue setup using this partition.
11. Select Format the partition using the NTFS file system
(Quick) and then press
enter.
Ä
CAUTION: Formatting this drive deletes all current files.
12. Press F to format the drive. (The reinstallation process begins.
This process takes 1 to 2 hours to complete. The notebook
restarts in Windows when the process is complete.)
Reinstalling Device Drivers and Other
Software
After the operating system installation process is complete, you
must reinstall drivers.
To reinstall drivers, use the Application and Driver Recovery disc
included with the notebook:
1. While running Windows, insert the Application and Driver
Recovery disc into the optical drive.
If you do not have Autorun enabled, select Start > Run.
Then type
D:\SWSETUP\APPINSTL\SETUP.EXE (where D indicates
the optical drive).
2. Follow the on-screen instructions for installing the drivers.
After the drivers are reinstalled, you must reinstall any software
you added to the notebook. Follow the installation instructions
provided with the software.
To Next Page
Loading...
