HP Compaq NC4000

Modem and Networking
Hardware and Software Guide 10–5
To add a new location:
1. Select Start > Control Panel > Network and Internet
Connections > Phone and Modem Options > Dialing
Rules tab.
2. Select the New button, and then assign a name (home,
work, etc.) to the location.
3. Select the country or region from the drop-down list.
✎
The drop-down list may include countries not supported by
the modem. Unless you select a supported country, the
country selection will default to USA or UK.
4. Select OK > OK.
Solving Travel Connection Problems
If you experience connection problems while using the modem
outside your home country, the following suggestions may help:
■ Check the telephone line type
The modem requires an analog, not a digital, telephone line.
A line described as a PBX line is usually a digital line. A
telephone line described as a data line, fax machine line,
modem line, or standard telephone line is probably an
analog line.
■ Check the tone or pulse dialing settings
Dial a few digits on the telephone and listen for clicks
(pulses) or tones. Then:
1. Select Start > Control Panel > Network and Internet
Connections > Phone and Modem Options > Dialing
Rules tab.
2. Select your location and then select Edit.
3. Select either Tone or Pulse, depending on what you heard
on the line.
4. Select OK > OK.