HP Compaq NC4000

11–14 Hardware and Software Guide
Wireless (Select Models Only)
Turning On the Devices
✎
If you want your wireless devices to be turned on when you
turn on your notebook, you must turn them on before you shut
down or restart.
If And Then
■ Wireless Assistant
shows that both
WLAN and
Bluetooth are off
■ Wireless light is off
You want to turn
on either or both
devices
1. Right-click the Wireless
Assistant icon in the
notification area (at the
far right of the task bar).
2. Select the device or devices
you want to turn on.
✎
If the wireless devices are
turned off, pressing the
wireless button disables
both devices. The button
does not turn on the
devices.
■ Wireless Assistant
shows that both
WLAN and
Bluetooth are
disabled*
■ Wireless light is off
You want to turn
on either or both
devices
1. Press the wireless button.
(The devices return the their
previous on or off state.)
2. If the wireless devices are
turned off, right-click the
Wireless Assistant icon in
the notification area.
3. Select the device or devices
you want to turn on.
■ Wireless Assistant
shows that one
device is on and the
other device is off
■ Wireless light is on
You want to turn
on either or both
devices
1. Right-click the Wireless
Assistant icon in the
notification area.
2. Select the device or devices
you want to turn on.
*If the wireless devices are not both on when you disable the devices, pressing
the wireless button again returns the devices to their previous on or off state.
Pressing the button does not turn on both devices.