HP Compaq NC4000

B–8 Hardware and Software Guide
MultiBoot
Entering MultiBoot Express Preferences
When the Express Boot menu is displayed during startup:
■ To specify a startup location from the Express Boot menu,
select your preference within the allotted time, and then
press
enter.
■
To prevent the notebook from defaulting to the current
MultiBoot setting, press any key before the allotted time
expires. The notebook will not start up until you select a
startup location and press
enter.
■ To allow the notebook to start up according to the current
MultiBoot settings, wait for the allotted time to expire.