Security
Hardware and Software Guide 12–9
Your preferences are set when you exit Computer Setup and take
effect when the notebook restarts.
Entering HP Administrator Passwords
At the Administrator Password prompt, type your administrator
password (using the same kind of keys you used to set the
password), and then press enter. After three unsuccessful
attempts to enter the HP administrator password, you must restart
the notebook and try again.
Power-On Password
A power-on password prevents unauthorized use of the notebook.
After it is set, a power-on password must be entered each time the
notebook is turned on or restarted. A power-on password
■ Does not display as it is set, entered, changed, or deleted.
■ Must be set and entered with the same keys. For example, a
power-on password set with keyboard number keys will not
be recognized if you enter it with keypad number keys.
■ Can include any combination of up to 32 letters and numbers
and is not case sensitive.
Setting a Power-On Password
A power-on password is set, changed, or deleted in Computer
Setup. To manage the password:
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power/standby button, and then shut down the
notebook through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
To Next Page
Loading...
