11–2 Hardware and Software Guide
Wireless (Select Models Only)
Your notebook has a button that may be used to enable and
disable the 802.11 and Bluetooth wireless devices and an
associated light to indicate the state of the wireless devices. The
following illustration shows the wireless button 1 and light 2.
In addition to the wireless button and light, your notebook has
software controls that enable you to turn on, turn off, enable, and
disable your wireless devices. The following table explains the
software controls.
Wireless Control Description
Wireless Assistant Is a software utility that enables you to turn on
and off the 802.11 and Bluetooth wireless
devices individually. For more information on
using Wireless Assistant, refer to the “Device
Power States” section, later in this chapter.
Computer Setup
controls
Enable and disable the 802.11 and Bluetooth
wireless devices in Computer Setup. For more
information about using Computer Setup to
control the 802.11 and Bluetooth wireless
devices, refer to Chapter 13, “Computer Setup.”