Software Update and Recovery
Hardware and Software Guide 14–3
To display ROM information in Computer Setup:
1. Turn on or restart the notebook. Press
f10 while the
“F10 = ROM Based Setup” message is displayed in the
lower-left corner of the screen.
❏ To change the language, press f2.
❏ For navigation instructions, press f1.
2. Use the arrow keys to select File > System Information and
then press
enter.
The ROM information is displayed.
3. To exit Computer Setup without changing any settings,
use the arrow keys to select File > Ignore Changes and
Exit, and then follow the instructions on the screen.
After Computer Setup closes, the notebook restarts in
Windows.
To Next Page
Loading...
