98 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
POST Problems Flowchart
Symptoms:
• Server does not complete POST
NOTE: The server has completed POST when the system attempts to
access the boot device.
• Server completes POST with errors
Possible Problems:
• Improperly seated or faulty internal component
• Faulty KVM device
• Faulty video device
Item Refer to
1 "POST Error Messages ("POST Error Messages and Beep
Codes" on page 186)"
2 "Video Problems (on page 126)"
3 KVM or RILOE documentation
4 "Loose Connections (on page 108)"
5 Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
6 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 • "Hardware Problems (on page 105)"
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
To Next Page
Loading...
