HP ENVY x2 12

Removing a nano SIM card
To remove a nano SIM card:
1. Position the computer display-side up on a at surface.
2. Insert the removal tool or a small straightened paper clip (1) into the card tray access hole.
3. Press the tool or clip in gently until the card tray is ejected.
4. Remove the tray (2) from the computer and remove the card (3).
5. Replace the tray in the computer. Press in gently on the tray (4) until it is rmly seated.
To remove a nano SIM card, reverse the steps.
18 Chapter 2 Getting to know your computer