HP HPE MR Gen11 User Manual

HPE MR Gen11 ControllerHPE MR Gen11 Controller
The HPE MR Gen11 Controller is a family of tri-mode controllers ideal for maximizing performance while supporting advanced RAID levels. This controller
operates in mixed mode, which combines RAID and JBOD operations simultaneously.
This controller provides:
Up to 16 lanes across 2 x8 internal SlimSAS (SFF-8654) ports
16 Gbs NVMe, 12 Gbs SAS, 6 Gbs SATA
Mixed mode RAID and JBOD functionality simultaneously
UEFI boot mode
Support for Self-Encrypting Drive (SED)
8 lane PCIe Gen4 host interface
Security Protocol and Data Model (SPDM) authentication
Management tools:
HPE MR Storage Administrator
IMPORTANT:IMPORTANT:
This controller is managed through the HPE MR Storage Administrator. It cannot be managed using Smart Storage Administrator,
Intelligent Provisioning, or HPE OneView. MR controllers can be monitored by HPE OneView.
HPE StorCLI
UEFI Storage Configuration Utility
Redfish RESTful API
Figure 1. Figure 1. HPEHPE Gen11 Storage Controller naming framework Gen11 Storage Controller naming framework
SubtopicsSubtopics
200 series200 series
400 series400 series
200 series200 series
The following controllers are supported.
HPE MR216i-o Gen11 16 Internal Lanes/No Cache SPDM OCP Storage Controller
HPE MR216i-p Gen11 16 Internal Lanes/No Cache SPDM PCI Plug-in Storage Controller
HPE MR Gen11 Controller User Guide 7

HP HPE MR Gen11 Specifications

General

Category	Controller
Product Name	HP HPE MR Gen11
RAID Levels	0, 1, 5, 6, 10, 50, 60
Form Factor	Low Profile
Storage	SAS/SATA HDD/SSD
Operating System Support	Linux, VMware