Status
At the printer’s front panel, tap the Maintenance icon , then Agents, then tap any agent to see its
s
tatus:
● Missing: The agent is missing.
● Empty: The agent is empty and should be replaced.
● Replace: The agent is faulty and should be replaced.
● Reseat: The agent is not responding; removing and reinserting it may solve the problem.
● Wrong: The agent type is not suitable for this printer.
● Expired: The agent has reached its expiration date. Using expired agents may affect the warranty on
y
our printheads.
● Low on agents: The agent is low and should be replaced soon.
● Very low on agents: The agent is very low and should be replaced soon.
● Incorrect
● Non-HP
● OK: The agent is working normally.
● Out of agents: The agents should be replaced.
NOTE: The level of each agent shown on the front panel is an estimate. It is strongly recommended
no
t to remove an installed cartridge until it is depleted and the printer request the replacement.
LEDs
● White: OK
● Yellow: Warning
● Red: Error, out of agent
Replace an agent
NOTE: You can replace the agent cartridges while printing continues, because the printer is supplied
fr
om the intermediate tanks.
1. At the printer’s front panel, tap the Maintenance icon , then Agents > Replace.
108 Chapter 11 Hardware maintenance
To Next Page
Loading...