Safety precautions2
How to use your product safely.
Introduction
Before using the equipment, read the following safety precautions and operating instructions to make
sur
e you can use it safely.
You are expected to have the appropriate technical training and experience necessary to be aware
of hazards to which you may be exposed in performing a task, and to take appropriate measures to
minimize the risks to yourself and to others.
Perform the recommended maintenance and cleaning tasks to ensure the correct and safe operation of
the equipment.
Operations must be supervised at all times.
The equipment is stationary, and should be located in a restricted-access area, for authorized personnel
only.
General safety guidelines
Use the equipment only when it is in good working order and in the recommended environmental
conditions.
Turn off all equipment, using the branch circuit breakers located in the building's Power Distribution Unit
(PDU), and call y
our service representative (see
When you need help on page 382) in any of the following
case
s:
● The power cord is damaged.
● The top heating and fusing lamp enclosures are damaged, the glass is missing or broken, or the
sealing is de
fective.
● The equipment has been damaged by an impact.
● Liquid has entered the equipment.
● There is smoke or an unusual smell coming from the equipment.
● The built-in Residual Current Circuit Breaker (Ground Fault Circuit Interrupter) has been repeatedly
tripped.
● Fuses have blown.
● The equipment is not operating normally.
● There is any mechanical or enclosure damage.
4 Chapter 2 Safety precautions
To Next Page
Loading...