Table 2-1 Warning labels (continued)
Label Explanation
Firmly tighten all fasteners, ensuring
that the assembly is well fixed together
before turning on the build unit.
Emergency stop buttons
There is an emergency stop button on the printer and another on the processing station. If an
emer
gency occurs, simply push the emergency stop button to stop all processes.
● In the case of the printer, the printer carriage, the recoater, the lamps, and the build unit are halted;
the build-unit door and t
op cover are locked until the internal temperature decreases.
● In the case of the processing station, the vacuum system, the motors, and the build unit are halted.
A system error message is displayed, and the fans turn at maximum speed. Ensure that the emergency
s
top button is released before restarting the equipment.
Emergency stop buttons 19
To Next Page
Loading...