NOTE: In some locations the use of cleaner products is regulated. Ensure that your cleaner follows
federal, state, and local regulations.
Maintenance resources
Supplies and tools that you may need for maintenance operations.
Maintenance kits
These maintenance kits are available from HP.
Table 11-1 Maintenance kits
Name Purpose How to order Part number
Printer initial maintenance kit
(3FW25A)
For periodic maintenance operations that require the
replacement of printer parts; lasts for about 100 full
jobs
Through the
usual channel
8VJ71A
Printer initial maintenance kit
(3FW25B)
For periodic maintenance operations that require the
replacement of printer parts; lasts for about 100 full
jobs
Through the
usual channel
348C4A
Processing-station maintenance
kit
For periodic maintenance operations that require the
replacement of processing-station parts
Through the
usual channel
8VJ72A
Kit contents and recommended tools
These are the expected contents of each kit in detail.
NOTE: The contents may vary in future.
Printer initial maintenance kit contents (8VJ71A)
The maintenance kit contains spare components that you may need to replace from time to time.
NOTE: This kit is for 3FW25A model printers.
Table 11-2 Printer initial maintenance kit contents (8VJ71A)
Part Description SKU Quantity of
it
ems inside
each SKU
Quantity of
SKUs in Initial
kit for 5200A
(8VJ71A)
Purpose
HP Jet Fusion 5200 Series 3D
Printer Top Enclosure Right
Filters
1X9A5A 2 2
Replace the top-enclosure left and right fan
filters on page 226
HP Jet Fusion 5200 Series
3D P
rinter Top Enclosure Left
Filters
1X9A4A 1 2
Replace the top-enclosure left and right fan
filters on page 226
HP Jet Fusion 5200/4200
S
eries 3D Printer Heating
Lamps
8VJ63A 2 1
Replace a heating lamp on page 263
HP Jet Fusion 5200 Series 3D
P
rinter Fusing Lamps
8VJ73A 1 1
Replace the fusing lamps on page 126
98 Chapter 11 Hardware maintenance
To Next Page
Loading...