HP Jet Fusion 5200 Series - HP Smartstream 3 D Command Center

HP SmartStream 3D Command Center
Each device is represented by a card that summarizes the most important information about the device.
B
y default, the build status information is shown.
Table 3-5 Cards
Card Information Card information
The upper part of the card shows the following information:
● Icon that helps to identify the type of device.
● Shows the expected finish time, if a part is being built.
● Name of the device chosen by the user who registered it in Command Center.
● Current status of the device.
You can use the drop-down menu to view information on builds and supplies.
HP SmartStream 3D Command Center 31