3. The process ends when the storage tank is full or the external tank is empty, whichever happens
first.
TIP: If the process stops during an automatic fill of the storage tank, and there is still material
inside the external tank, ensure that the external material collector is not obstructed by broken
parts of non-useful material. If the external material collector is clean but there is a hole in the
material near the external tank lance, continue the fill manually.
4. Unplug the external tank collector.
5. Close the lid and latches.
How to recycle supplies
Parts and waste generated during the printing process should be disposed of in compliance with
f
ederal, state, and local regulations.
Consult your local authorities to determine the correct manner in which to dispose of wastes. It may be
possible to recycle printed parts for non-3D uses. Where appropriate, HP recommends that the parts be
marked with the applicable plastic marking code according to ISO 11469 to encourage recycling.
HP provides many free and convenient ways to recycle your used HP cartridges and other supplies. For
information about these HP programs, see the HP website
http://www.hp.com/recycle/.
The following supplies for your printer can be recycled through the HP supplies recycling program:
● HP printheads
High-volume 3-liter cartridges should be disposed of by following the instructions on the cartridge
pack
aging. The agent bag should be removed and disposed of in compliance with federal, state, and
local regulations. The other cartridge parts (plastic retainer and packaging box) can be recycled through
commonly available recycling programs.
Dispose of the following supplies in compliance with federal, state, and local regulations:
● Material cartridges
For further information about recycling cartridges, see the HP website
http://www.hp.com/go/jetfusion3Dprocessingstation/recycle.
● Printhead cleaning roll
● Lamps
● Filters
HP recommends that you wear gloves while handling printer supplies.
Printer maintenance
Maintenance operations on the printer.
Summary of maintenance operations
The printer maintenance operations, and how frequently each one is required.
How to recycle supplies 147
To Next Page
Loading...