Set the administrator password
You can set the administrator password from the front panel.
Tap the Settings icon , then Security > Administrator password, and enter the password. If a
password has already been set, you will need to give the old password in order to set a new one.
The administrator password must be given in order to change printer settings.
Software
HP provides software to accompany your 3D printing solution.
The software can be downloaded from the HP website:
● http://www.hp.com/go/jetfusion3D5200/software
● http://www.hp.com/go/jetfusion3D5210/software
● http://www.hp.com/go/jetfusion3D5210pro/software
● http://www.hp.com/go/jetfusion3Dprocessingstation/software
30 Chapter 3 Main components
To Next Page
Loading...