Power on and off4
How to turn your printer and processing station on and off.
NOTICE: Operate the equipment only within the specified ranges of operating temperature and
humidity (see the site preparation guide). If the equipment or supplies are exposed to conditions
outside the environmental operating range, wait at least 4 hours for everything to reach environmental
operating conditions before turning on the equipment or using the supplies.
Turn the printer on and off
The correct procedure changes after the first time.
Turn on the printer for the first time
Follow these steps carefully, the first time that you turn on the printer.
1. Make sure that the two bottom rows of circuit breakers at the front right of the printer are all in the
up position and that the three green lamps are on. If any of them are off, check with your electrician.
36 Chapter 4 Power on and off
To Next Page
Loading...