3. Pull the filter out of the frame and dispose of it according to local regulations.
4. Insert the new filter provided in the kit.
5. Put back the filter grid and its screws.
Finish the replacement
The following steps provide the complete procedure for this topic.
1. Ensure that all windows, covers, and doors are closed and remain in their original positions.
2. Turn on the printer.
3. At the front panel, tap the Maintenance icon , then Filters > Print zone > Replace.
Replace the top-enclosure left and right fan filters
Replace the right or left top-enclosure filter when requested by the front panel.
Figure 11-17 Safety warnings
Tap the Maintenance icon , then Filters > Left/right top enclosure > Replace.
When a top-enclosure filter becomes clogged with material, the printer shows a Left/right top-enclosure
filter full alert. Normally, cleaning the filter is enough to recover its functionality (see
Clean the top-
enclosure fan filters on page 180). However, after several cleaning operations, the top-enclosure filter
226 Chapter 11 Hardware maintenance
To Next Page
Loading...