5. Put back the cleaned spittoon, inserting the rear end first.
6. Reinsert and tighten the screw.
Finish cleaning
1. Close the top cover.
2. At the front panel, tap the Settings icon
, then Utilities > Maintenance > Clean spittoon.
Clean the bottom of the carriage and of the fusing lamps
Cleaning inside the printer.
Figure 11-7 Safety warnings
Prepare for cleaning
1. Ensure that you have a lint-free cloth and deionized water (these things are not provided by HP).
2. Ensure that the printer is not printing.
3. Turn off the printer.
4. If a job has just been printed, wait about 20 minutes for the printer to cool down.
5. You are required to wear gloves and goggles.
Finish cleaning 161
To Next Page
Loading...