2. Clean the carriage bottom with a lint-free cloth dampened with deionized water.
CAUTION: Be very careful not to touch the printheads.
3. Clean the bottoms of both fusing-lamp glasses with the same cloth.
Finish cleaning
1. Close the top cover.
2. Close the build-unit door.
3. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Clean the thermal camera glass
Cleaning inside the printer.
Prepare for cleaning
1. Ensure that you have an explosion-protected vacuum cleaner, a supply of soft cloths, a mild,
non-abrasive detergent, a general-purpose industrial cleaning liquid, and deionized water (these
things are not provided by HP).
Finish cleaning 163
To Next Page
Loading...