3. Afterwards, you can wipe it with a dry cloth.
4. Still wearing gloves and goggles, clean condensation from the external surfaces behind the air-
collection hoods.
Clean the recoating roller and recoating plates
Cleaning inside the printer.
Figure 11-8 Safety warnings
Prepare for cleaning
1. Ensure that the printer is not printing.
2. Turn off the printer.
3. If a job has just been printed, wait about 20 minutes for the printer to cool down.
4. You are recommended to wear gloves.
Clean the recoating roller and recoating plates 167
To Next Page
Loading...