4. At the front panel, tap the Maintenance icon , then Filters > Replace
5. Remove the filter cover.
6. Remove each filter assembly, and take it somewhere with a non-explosive atmosphere.
7. Position the filter horizontally over a hard surface, with the airflow direction arrow pointing upwards.
Then knock the filter gently against the hard surface until no material drops out of it.
CAUTION: Do not clean the filter with a vacuum cleaner, which could damage it.
CAUTION: Do not press the filter with your fingers, which could also damage it. Hold the filter
fr
ame without touching the filter itself.
182 Chapter 11 Hardware maintenance
To Next Page
Loading...